________________________________________________________________________________
9 – Stationary lifter (90/125/130/175/225P)
5.3 Trouble shooting
The stationary lifter is designed for safe and efficient operation, provided that routine
maintenance is carried out in accordance with the instructions given. If problems arise, some
guidance is provided below. If the problem persists after action has been taken – Please contact
service technician or Pronomic.
If the load carrier does not move at all, or very slowly:
• Verify that the maximum load is not exceeded.
• Check the AC/DC converter.
If the lift trolley sounds strange:
• Make sure the stationary lifter is correctly assembled, see section Assembly.
• See section Maintenance.
6 Technical specifications
To Next Page
Loading...
