Pronomic 90P - Declaration of Incorporation of Partly Completed Machinery

________________________________________________________________________________
15 – Stationary lifter (90/125/130/175/225P)
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Manufacturer
Pronomic AB
Box 5504
192 05 Sollentuna
Sweden
Model
Parts for stationary lifter  90P  125P  130P  175P  225P
Serial number
Static load test
Applied EC directives:
2006/42/EC
Machinery Directive
2004/108/EC
EMC Directive
Applied standards:
EN ISO 12100-1:2010
Safety of machinery – General principles for design. Risk assessment and risk
reduction
SS-EN 349+A1:2008
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
We hereby declare that the above-referenced partly completed machine, installed and maintained after
instructions provided in this manual, is in conformity with stated directives and standards.
The partly completed machinery must not be put into service until the final machinery into which it is to
be incorporated has been declared in conformity with the provisions of this Directive.
Sollentuna, 2015-01-20
…………………………………………………………
Joakim Stannow, PRONOMIC AB
______________________________________________________________________________
The partly completed machine has been modified and/or equipped with attachments as follows:
……………………………………………………………………………………………………………………………………………………………………….…….
……………………………………………………………………………………………………………………………………………………………………….…….
After modification a supplementary risk analysis has been performed and the partly completed machine is
certified to be in conformity with the directives and standards above.
…………………………………………………………………………………………
Place, date
…………………………………………………………………………………………
Name
…………………………………………………………………………
Company