EasyManua.ls Logo

Prorelax Sensitive - Disposal Instruction; Décolleté; Technical Data

Prorelax Sensitive
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
53
DECOLLETÉ
USE
TECHNICAL DATA
Components
Select PROGRAM M or 1 for the flabbiest parts and PROGRAM 1 or 2 for the less
flabby parts. To make the cup slide more easily over the area, apply oil-based
cosmetics (such as baby oils).
ALWAYS begin with the power level at the minimum; you can increase the power
when you have seen how best to use the appliance.
·
Do the massages shown in the figures
concentrating them in an upward
direction.
Technical
specifications
AND NOW, WE WISH YOU A LOT OF SUCCESS WITH YOUR VACUUM MASSAGER
ON THE WAY TO A GOOD FIGURE AND A HEALTHY SKIN!
Disposal Instructions
Waste electrical devices marked with this sign must not be dis-
posed of with your household waste, but are to be collected
separately. Therefore, please return this device at the end of its
life cycle to special collection points for disposal or your local
Your massager is packed in a retail box. Such boxes are recyclable
waste, i.e. they are reusable or recyclable.
dealer.
IFR14500
Battery
Temperature range 10 - 50° C
Humidity range 30-70 %
Storage and transport conditions
10° C bis 40° C
Operating temperature
45 min. on / 30 min. off
Working cycle
Device 230 g
Power supply 90 g
Suction cups 140 g
Weight
Min. 13,3 Max. 53,30 kPa
(2 - max. 8 psi)
Maximum suction strength
5-6 hours
Battery charting time
Input: 110-240V~,50/60Hz, 0,3A Max
Output: 4,2V
1.5A
Power supply voltage:
HYT-0421500E
Power supply MODEL
Avatar Product Design Co.
Power supply supplier
1 piece
Operating manual
1 piece
Power supply
3 pieces
Diameter:15, 30 and 55 mm
Suction cup for face x 2
Replaceable suction cups
1 piece
Vacuum nassager

Related product manuals