30
RIGHT HAND CONSOLE
LOW CUTTING SPEED BUTTON (Part 11)
The Low Cutting Speed Button is located on the Right Hand Console next to the
Cruise Control Knob. Pressing the Low Cutting Speed Knob reduces the blade’s
rotation to the lower speed of 2900 RPM (Normal rotational blade speed is 3200
RPM).
CRUISE CONTROL BUTTON (Part 12)
The Cruise Control Button is located on the Right Hand Console next to the Reverse
Mode Operating Button (RMO). Pressing the Cruise Control Button while the mower
is in motion allows the mower to remain at a constant speed without pressing the
Forward Drive Pedal. The Cruise Control can be disengaged by pressing either the
Cruise Control Button, or the Brake Pedal, or the Forward Drive Pedal, or the Reverse
Drive Pedal.
Cruise Control will not engage in reverse.
REVERSE MODE OPERATION BUTTON (RMO) (Part 13)
The Reverse Mode Operation Knob (RMO) is located on the Right Hand Console to
the left of the Blade Start / Stop Knob.
The blades will stop when traveling in reverse. To keep the blades rotating when
traveling in reverse, press the Reverse Mode Operating Button (RMO).
Mowing in reverse is not recommended.
To Next Page
Loading...
