52
If The Deck Wheels Have Excessive Clearance or Contact with The Surface, Adjust as
Follows:
1. Raise the Deck Lift Handle to its
highest setting.
2. Remove the Front and Rear Deck
Wheels by removing the Lock Nuts,
Tubes, and Bolts.
3. Place the Deck Lift Handle into the
desired mowing height setting.
4. Reinsert the Bolts (with each Deck
Wheel) into the index hole that
leaves approximately ¼-inch to ½-
inch between the bottom of the
Deck Wheel and the pavement
service.
PARKING BRAKE ADJUSTTMENT
If the mower does not come to a complete stop when the Brake Pedal is completely
engaged, or if the mower’s rear wheels can roll with the Parking Brake Handle
applied, the Brake is in need of adjustments. Contact PRORUN Customer Service with
questions or issues with this machine.
SERVICE
Contact PRORUN Customer Service for replacement parts. Use only
identical replacement parts. This will ensure that the safety of the mower is maintained.
The electrical components of this mower are not user serviceable. Contact
PRORUN Customer Service with questions or issues with this machine .
BLADE CARE
When removing the cutting blade(s) for sharpening or replacement,
protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade(s).
After striking a foreign object. stop the mower. Thoroughly inspect the
machine for any damage. Repair the damage before starting and operating.
To Next Page
Loading...
