PRORUN PRM48V38 - Page 56

56
PROBLEM
POSSIBLE CAUSE
REMEDY
The blades
do not
rotate, or
the blades
stopped.
1. Left cutting deck
communication failure.
2. Right cutting deck
communication failure.
3. Overload.
4. Low battery.
5. Break sensor fault.
1. Shut off and restart mower. If the
problem persists contact PRORUN
Customer Service.
2. Shut off and restart mower. If the
problem persists contact PRORUN
Customer Service.
3. Shut off and restart mower. If the
problem persists contact PRORUN
Customer Service.
4. Shut off and restart mower. If the
problem persists contact PRORUN
Customer Service.
5. Shut off and restart mower. If the
problem persists contact PRORUN
Customer Service.
The blades
do not
rotate in
reverse.
Blades stop.
Always press the Reverse Operation
Mode Button (ROM).
Reduced
speed.
1. Low battery.
2. Overload.
1. Charge the battery as instructed in
the Battery Charger manual.
2. Raise cutting deck.