What to do if my ProScan Air Cleaner has no power or response?
If your ProScan Air Cleaner isn't powering on or responding, first ensure it's properly plugged into a working electrical outlet. If the outlet seems fine, try a different one. If the power cord is damaged, stop using the unit immediately and contact Customer Support. The air purifier may also be defective or malfunctioning.
Why is the airflow significantly reduced in my ProScan Air Cleaner?
If you notice a significantly reduced airflow in your ProScan Air Cleaner, ensure there are at least 15 inches (38cm) between the unit and any surrounding objects. Also, make sure you have unwrapped the plastic bag from the filter before use.
How to fix unusual noise while operating my ProScan Air Cleaner?
Unusual noise from your ProScan Air Cleaner can be due to dirty filters or filters that are installed improperly. Try replacing the filter. If that doesn't solve the problem, make sure the filter is placed correctly.
What to do if my ProScan Air Cleaner has poor air purification quality?
If your ProScan Air Cleaner isn't purifying the air well, check if the air inlet or outlet is blocked by any objects and remove them. Also, ensure that the filter is properly placed in its housing.
Why does my ProScan Air Cleaner have an unpleasant smell?
An unpleasant smell from your ProScan Air Cleaner may be due to a dirty filter that has been used for a long time; in this case, replace the filter. The smell can also appear if you are using the air purifier in moist conditions or if water entered in the filter.
General| Brand | ProScan |
|---|---|
| Model | PAP1010 |
| Category | Air Cleaner |
| Language | English |
To Next Page