EasyManua.ls Logo

ProScan PAP1010 - Specifications; Important Safety Instructions

ProScan PAP1010
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
Model
CADR
Applicable Area
Filter Structure
Filter Lifespan
Rated Power
Power Supply
Operating TEMP
Dimension (H*L*W)
Weight
200m³/h (135CFM)
PAP1010
Up to 315sq.ft. (30m²)
Pre-Filter
True HEPA Filter
Activated Carbon Filter
6 months
50W
AC120V, 60Hz (18AWG 70-inch cord)
15°F ~ 130°F (-10°C ~ 55°C)
19.67 * 12.6 * 7.23 inches
10lbs (4.5kg)
SAFETY INSTRUCTIONS
3
MPORTANT:
Please read and comply with all of the instructions and warnings in this manual before use.
Failure to comply with the instructions and warnings provided herein may result in inaccurate results
and/or damage to the product itself.
General Safety
Only use this air purifier as described in this manual.
Ensure the plug fits properly into an AC power outlet.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat
this safety feature.
When not being used, turn the air purifier off and disconnect it from its power source by unplugging
from the electrical outlet.
DO NOT operate the unit if its cord or plug is damaged. It may result in damage to the unit or injury.
It must be replaced by the manufacturer or other qualified person so as to avoid all risks.