Connectin
g Cable or Satellite boxes with HDMI…
1. Make sure the power of HDTV
and
your set-top box is turned off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to
the HDMI port on the back of your HDTV.
3. Turn on the HDTV and your set-top box.
4. Use the remote control’s source button or the source button on the TV to switch to
HDMI.
Please Note:
Please re
ference the set-top box’s manual, to make sure the set-top box is
configured to output correctly to the TV.
HDTV
supports NEC’s universal remote code. Please look up NEC’s
codes in your universal remote’s hand book.
To Next Page
Loading...
