ProScan PLDEDV3293-UK - Sound Mode and Adjustments

14
5. Press “c/d” button to select “Hue’’ and press the “e/f” button to enter hue adjustment menu
to adjust hue.
Note:
The 'hue' item is used in NTSC mode only.
6. Press “c/d” button to select “Sharpness” and press the “e/f” button to enter sharpness
adjustment menu to adjust sharpness.
7. Press “c/d” button to select “Color Temp” and press the “e/f” button to select mode˖
StandardˈCoolˈWarm..
8. Press “c/d” button to select “Aspect Ratio” and press the “e/f” button to select.
9. Press “c/d” button to select “Advanceed Settings” and press the “f” button to enter
Advanceed Settings adjustment menu to adjust.
SOUND
You can select the type of sound, which best corresponds to your listening.
Press the “MENU” button to enter the OSD menu. Then press “e/f” button to select the
“SOUND” menu.
1. Press “c/d” button to select “Sound Mode” and press the “e/f” button to select mode.
2. Press “c/d” button to select “Treble” and press the “e/f” button to adjust.
3. Press “c/d” button to select “Bass” and press the “e/f” button to adjust.
4. Press “c/d” button to select “Balance” and press the “e/f” button to adjust.
5. Press “c/d” button to select “Surround sound’’and“e/f” button to selectĀON”or “OFF”.
6. Press “c/d” button to select “EQ Setting’’and“e/f” button to enter EQ Setting adjustment
menu to adjust EQ..
7. Press “c/d” button to select “AVL” and press the “e/f” button to select “On” or “Off”.
Press “c/d” button to select “SPDIF” and press the “e/f”button to select “PCM” or “Off” or “Auto”.
8.
9. Press “c/d” button to select “Sound Type” and press the “e/f” button to select.
SPDIF PCM
Sound Type Stereo