ProScan PLDEDV3293-UK - Lock System; Enabling and Configuring Lock Features; Password Management

15
LOCK SYSTEM
Press the “MENU” button to enter the OSD menu. Then press “e/f” button to select the
“Lock System” menu. The default password is “0000”.
Note: The administrator password is “8899’’.
1. Press “c/d” button to select “Enable’’and then press “e/f” button to select “On” or “Off”
2. Press “c/d” button to select “channel locks” and press the “f” button to select channel˄s˅to
lock .
3. Press “c/d” button to select “Parental Rating” and press the “e/f” button to set.
4. Press źŸEXWWRQWRVHOHFW³Lock Keypad”, then press button to select “On” or “Off”, The
key board will be invalid if you set Lock Keypad “On”.
5. Press źŸEXWWRQWRVHOHFW³Hotel Mode” and press the “f” button to enter the sub-menu to
set.
6. Press źŸEXWWRQWRVHOHFW³New Password” and set your new password.
7. Press źŸEXWWRQWRVHOHFW³Clear Lock”and then press the “f” button to clear.