28
DVD SYSTEM SETUP
4:3 /PS (PS=Pan and Scan)
Y
ou may select if you have a normal aspect ratio (4:3) TV, although the
NORMAL/LB (letter box) is a more common (letter box) choice. In PS mode,
widescreen material will fill the screen, but at the expense of chopping off extreme
left and right edges of the original film picture. For this feature to work, the disc
must be specially coded. Such discs are uncommon.
4:3/LB (LB=Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area of
the original film to be viewed without any side cropping. Black
bars will appear
above and below the picture,
16:9
You may select this if you
have a widescreen (16:9)TV, back bars may still appear
above and below the picture even if using a widescreen TV, this is because some
film directors prefer to use ultra widescreen aspect ratios e.. g . 2.35:1. This will
normally be indicated on the DVD packaging.
General Setup Process
1. press the DVD-SETUP button, the general setup
page, preference page will be displayed in turn,
2. press
or to select, the item, then press to
enter the submenu.
3. press
or to select, then press
PLAY/PAUSE or ENTER to confirm.
4. press DVD SETUP repeatedly to exit the set-up
menus.
General setup page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV, select
4:3/LB.
The following information applies only when the
DVD output is connected to an external TV.
To Next Page
Loading...
