We appreciate your choosing PROSCAN Sound bar for use in your home. These unique sound bar will
provide you with powerful and satisfying sound from an ultra stylish & compact package. Please read
this manual completely to ensure the best possible performance from your system.
Panel Description
Pair:The indicator for pair with wireless subwoofer ,The bar PAIR red light flicker as long press 5seconds of pair key in the remote ,and then
press subwoofer pair button for hold 5seconds turn the indicator green light flashing to be red light .connect successfully while indicator long
bright .please switch sound bar in case of connection fail and turn on the power again for connection automatically .
IR： The remote control signal receiver
BT: The Indicator for Bluetooth input status. Frequent blinks of the LED indicate a failure of the communication, while infrequent
ones indicates a successful communication.Bluetooth connection name:PROSCAN
.
AUX1/2: The input signal indicator. The indicator is green when the signals are being input into AUX1, red into AUX2 .orange light blink slowly
for Mute and orange light on for standby.
Remarks :Keep away 4M from microwave oven & WIFI when set up sound bar system for better signal transmission .
Description of the terminals at the back
1: Power switch
2：DC 21V 1.7A input jack
3: Sound bar heat emission hole
4:Input AUX1/AUX2
1
2
3
4
To Next Page
Loading...
