ProScan PSB378W - User Manual

Questions and Answers

J
Justin MooreAug 3, 2025
How to fix ProScan PSB378W when there is no power?
- C
  cparkerAug 3, 2025
  If your ProScan Subwoofer has no power, make sure the adapter is properly connected to both the unit and the wall outlet. Also, check if the unit is in power off mode; if so, press the Standby/Source button on the unit or the button on the remote control to turn it on.
J
Jessica ThomasAug 10, 2025
Why is my ProScan PSB378W remote control not working?
- A
  Albert DyerAug 10, 2025
  If your ProScan Subwoofer remote control isn't working, it might be out of range. Ensure you're within 16 feet and pointing it at the sensor, within a +/-30 degree angle. Also, the remote's battery might be drained, so try replacing it with a new one.
S
Stephen StewartAug 15, 2025
What to do if my ProScan PSB378W has no sound or sound is weak?
- R
  Rebekah CastanedaAug 15, 2025
  If your ProScan Subwoofer has no sound or the sound is weak, check these things: * Make sure the volume isn't set too low; increase it using the Vol+ button on the unit or the + button on the remote. * Confirm that the connected device is playing audio and its volume is turned up. * Ensure the correct input source is selected by pressing the button on the remote or the Standby/Source button on the unit.
J
Juan BenderAug 21, 2025
How to fix ProScan Subwoofer sound distortion or rattle?
- H
  Hayley ArnoldAug 21, 2025
  To fix sound distortion or rattling on your ProScan Subwoofer, reduce the volume level. You can do this by pressing the Vol- button on the unit or the - button on the remote control. Also, lower the volume on the paired or connected device.
W
walterskennethAug 28, 2025
Why ProScan Subwoofer bluetooth reception failure?
- I
  iloweAug 28, 2025
  If you're experiencing Bluetooth reception failure with your ProScan Subwoofer, the external device might be too far away. Try moving it closer to the unit. Also, make sure you've properly paired the unit with the Bluetooth device, following the pairing procedures in the manual.