Prospera PL009 - Page 7

Operating the product
To begin
1.
Make sure the power/intensity switch is off and install 4 AAA batteries into the
device.
2.
Connect 1 electrode wire in the left hole and anothe
r electrode wire in the right
hole at the top of the pulse massager.
3.
Attach
the
electrode
pad
s to the treatment area
, such as shoulder
.
4.
Turn the power/intensity switch to 1. The screen should show P. This means the
device is ready to begin treatment.
5.
Pres
s one of the function keys to choose treatment.
6.
Adjust the
power/intensity to a comfortable level and
begin
treatment.
Note: Start low, and then gradually adjust to a level of comfortable treatment on a scale
level from to 1 to 10.
Best practices
:
1.
Dura
tion is 10
-
15 minutes for treatment area.
2.
Frequency is 1
-
2 treatment per day.
3.
Intensity is based upon your level of comfort.
4.
Speed is based on your level of comfort.
5.
Begin the first session with a low intensity and a short duration while learning
how to o
perate.
6.
If you feel pain, dizziness, discomfort or nausea, call your physician.