ProTec Polymer Processing FG 205

Need help?

Do you have a question about the ProTec Polymer Processing FG 205 and is the answer not in the manual?

Summary

EC-Declaration of Conformity

Safety

Safety labelling

Explains the structure and meaning of warning signs and symbols used in the manual.

Personnel selection and qualification

Outlines requirements for personnel operating, servicing, or repairing the system.

Safety-related instructions for specific operating phases

Provides safety guidance for different operational stages like normal and special modes.

Instructions for special types of risks

Addresses specific risks such as electrical energy and its associated safety measures.

Assembly;Disassembly

Connecting conveying line

Instructions for connecting the conveying line, including earthing considerations.

Earthing of conveyors and conveyor lines

Explains the importance and procedures for proper earthing of the system components.

Earthing the conveyor line

Provides detailed steps for earthing the conveyor line using different hose types.

Mounting a suction hose

Disassembly

Commissioning

Step-by-step instructions for initial setup and operation of the conveyor.

SOMOS control;basic - device control system

Overview of the SOMOS control system interface and basic functions.

Service and maintenance

Clean conveyor

Instructions for cleaning the conveyor, including periodic cleaning and after material changes.

Removing the blower attachment

Replacing the carbon brushes

Detailed guide on how to replace the carbon brushes in the blower motor.

Replacing the blower

Instructions for replacing the entire blower unit.

Conveyed goods container

Replacing the discharge flap assembly

Procedure for replacing the entire discharge flap assembly.

Replacing check valve

Dosing attachment (optional)

Replacing compressed air cylinder 2

Replacing compressed air cylinder 1

Replacing the control valve