EasyManua.ls Logo

ProTec Polymer Processing FG 205 - Safety; Safety labelling

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
8
2 Safety
The system was built to the technical state of the art and the recognised safety rules and
regulations. However, with its use, there can occur hazards for life and limb of the user or third
parties or negative influences on the system and other property.
The system must only be used in technically perfect condition as well as to intended use, safety
and hazard conscious observing this operating manual! Especially malfunctions that could
negatively influence the safety must be remedied immediately.
2.1 Safety labelling
2.1.1 Structure of the warning information
The following signal words are used in connection with the safety labelling to display certain
hazards in this document.
Danger!
Death or severe injuries will occur, if the corresponding
precautionary measures are not made.
Warning!
Death or severe injuries may occur, if the corresponding
precautionary measures are not made.
Caution!
Slight injuries can occur if the corresponding precautionary
measures are not made.
Caution!
Property damage may occur if the corresponding precautionary
measures are not made.
Information
Here you receive information and instructions for effective and safe
execution of the following activities.

Table of Contents

Related product manuals