To Next PageTo Next Page
Need help?Do you have a question about the Protec COMPACT2 SX 2 and is the answer not in the manual?
General| Brand | Protec |
|---|---|
| Model | COMPACT2 SX 2 |
| Category | Computer Hardware |
| Language | English |
Details the roller transport system and dimensions of films that can be processed.
Specifies the number of films processed per hour and adjustable process time ranges.
Lists tank capacities and operational temperature ranges for developer, fixer, and dryer.
Covers operating temperature, humidity, power requirements, and electrical connections.
Crucial guidance on safely handling chemicals, including protective measures.
Emphasizes electrical safety, servicing by trained personnel, and proper ventilation.
Outlines necessary water, drainage, and electrical connections for processor setup.
Step-by-step instructions for unpacking and assembling the main processor unit.
Details how to connect hoses for water supply, drainage, and chemical replenishment.
Steps for performing an initial system check with water before chemical loading.
Guide on preparing and accurately filling the developer and fixer tanks.
Describes the initial automatic process of filling baths and reaching operational temperature.
Explains how the machine maintains temperature and performs anti-crystallization cycles when idle.
Details the light barrier system that detects film presence and initiates transport.
Explains the film surface measurement for automatic chemical replenishment.
Identifies and explains the function of each button and display on the control panel.
Step-by-step guide to powering on the machine and its automatic processing sequence.
How to set and store operating parameters and manage time-based replenishment.
Explains the relationship between processing time, developer, and dryer temperatures.
Guidance on adjusting the replenishment time based on the required chemical rate.
Instructions for automatic tank filling and operating the processor in manual mode.
How to store/recall parameters and prevent accidental changes using the lock function.
Procedures for removing and installing the two-part dryer rack.
Tasks for daily cleaning of the film infeed and checking liquid levels.
Routine cleaning of roller racks and the machine's outer casing.
Periodic deep cleaning of tanks, rollers, and circulation systems.
Sections for recording machine details, parameters, and maintenance history.
A checklist of essential maintenance tasks, including functional checks and cleaning procedures.
Troubleshooting common issues affecting film quality, such as density and drying.
Guidance on diagnosing and resolving common machine errors and malfunctions.
Explanations for specific error codes (E1-E4, LO) displayed by the machine.
Instructions on how to safely remove the control printed circuit board.
Method to manually interrupt the initial start-cycle, mainly for service purposes.
How to view machine type and software version during the initial startup sequence.
Technical drawings showing overall dimensions and guidelines for transporting the unit.
Specifications for through-wall installations, required clearances, and mounting kits.
A comprehensive guide to diagnosing and resolving various operational and technical problems.
A catalog of all available spare parts with their order numbers for easy identification.
Electrical diagrams illustrating the machine's internal circuitry and connections.
