3.
Connect the tractors link arms to the machine lower link brackets and retain
in position with the linkage and lynch pins supplied.
4.
Connect the tractor top link (not supplied) to the machine and secure with
the linkage and lynch pin supplied. The tractor top link must be category 2 on
the machine end or conversion bush used if category 3.
Fitted to machine:-
5.
Adjust the Tractor link arm stabilisers to centralise the Post Driver and
reduce excessive lateral sway
6.
You must familiarise yourself and understand the controls and their
functions; therefore after studying the previous section practise moving the
levers before connecting any hydraulic hoses the tractor. The diagram shows
To Next Page
Loading...