Proteco ELITE NEW 3 User Manual

9
Elite New 3, Elite New 4, Elite New 5,
Elite New3 24, Elite New 4 24, Elite New 5 24,
Elite New 3 115, Elite New 4 115, Elite New 5 115
1.1.2 1.1.3 1.1.5 1.2.1 1.2.2 1.2.3 1.2.6 1.3.2 1.3.4 1.3.9 1.4.1
1.4.2.1 1.5.1 1.5.4 1.5.6 1.5.8 1.5.13 1.6.1 1.6.4 1.7.1 1.7.3 1.7.4
EN 61000-6-2
EN 61000-6-4
EN 61000-3-2
EN 61000-3-3
EN 12453
EN 60335-1
EN 60335-2-103
2014/35/UE (LVD)
2014/30/UE (EMC)
2014/53/UE (RED)
Proteco S.r.l. via Neive 77 12050 Castagnito (CN) Italia
tel (+39) 0173210111 fax (+39) 0173210199
www.proteco.net info@proteco.net
Gallo Marco
8. DECLARATION OF CONFORMITY
Translation of the original declaration
In accordance with Annex II B of Machinery Directive 2006/42/CE
The legal representatives of
hereby declare that the products listed below
electromechanical gear motor for swing gates
comply the following Essential Requirements of Directive 2006/42/CE Annex I
(Machinery directive):
are in conformity with the following directives:
The above listed products are delivered, limitedly to the applicable parts, according to the following standards:
Castagnito, 29.01.2018
They also state that:
- the relevant technical documentation is compiled in accordance with part B of Annex VII of
directive 2006/42/CE
- the relevant technical documentation is compiled and preserved by PROTECO SRL which
undertakes to transmit it by mail in response to a reasoned request by the national authorities.
- the partly completed machinery must not be put into service until th final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the directive 2006/42/CE

Proteco ELITE NEW 3 Specifications

General

Brand	Proteco
Model	ELITE NEW 3
Category	Gate Opener
Language	English