To Next PageTo Next Page
Need help?Do you have a question about the Proteco SIMPLY and is the answer not in the manual?
General| Motor Voltage | 24V DC |
|---|---|
| Max Gate Weight | 400 kg |
| Duty Cycle | 30% |
| Power Supply | 230V AC |
| Power Consumption | 280W |
| Maximum Gate Weight | 400 kg |
| Operating Temperature | -20°C to +55°C |
| Protection Rating | IP44 |
| Motor Type | Electromechanical |
| Control Type | Remote control |
| Safety Features | Obstacle detection |
Lists EC directives relevant to the product's compliance.
Lists technical standards used for product compliance.
Advises users to read and follow all safety instructions for safe operation.
Instructions for end users regarding gate system safety and operation.
Checks and considerations before installing the gate automation system.
Details entrapment zones and precautions during installation.
Guidelines for safe operation and use after installation.
Instructions on gate maintenance and safety advice for users.
Details the technical characteristics of the Kit Simply 230v.
Illustrates the physical dimensions of the gate automation kit.
Lists all the components included in the Kit Simply 230v.
Lists the documentation provided with the gate automation kit.
Details the contents of the bracket pack supplied with the kit.
Lists tools and additional materials needed for installation.
Describes methods to reinforce gates and posts for automation.
Details how to prepare the gate and hinges for automation.
Outlines the sequence of steps for installing the gate automation.
Explains how to identify left and right hand motors for installation.
Guides on identifying suitable points for attaching the motor to the gate.
Details pillar fixing points for inward opening gates hinged in the centre.
Details pillar fixing points for inward opening gates hinged on the corner.
Details pillar fixing points for outward opening gates hinged in the centre.
Details pillar fixing points for outward opening gates hinged on the corner.
Details pillar fixing for outward gates hinged on the front face of the pillar.
Explains methods for fixing the anchor plate to the pillar (bolting/welding).
Illustrates two ways to position the anchor plate on the pillar.
Guides on how to attach the motor to the anchor plate using motor anchor bolts.
Details the assembly of the articulated arm using its component parts.
Explains how to connect the assembled articulated arm to the motor drive shaft.
Details how to attach the articulated arm to the gate leaf.
Explains how to release the motor drive shaft for manual operation or emergencies.
Explains how to set the built-in limit switches for gate open and closed positions.
Step-by-step guide to setting the CAM switches for limit positions.
Details how to adjust cam switch positions for different opening angles.
Details the wiring connections for the left hand motor to the Q60AR control board.
Details the wiring connections for the right hand motor to the Q60AR control board.
Explains how to set one gate leaf to open before the other.
Wiring diagrams for inward opening double leaf gates.
Wiring diagrams for outward opening double leaf gates.
Covers completing the installation and proceeding with safety devices.
Details the terms and conditions of the 12-month limited warranty.
Outlines the process for obtaining repairs or replacements.
Answers common questions regarding operation, weather, and maintenance.
Lists and describes optional accessories for the gate automation kit.
Encourages feedback and provides contact information for support.
