Page 26
Inward and Outward Opening
The Kit Simply is versatile in which direction it can travel so it can open inwards and outwards. The following
few pages show wiring diagrams to explain how the motors are connected to the Q60AR Control Board
depending on how they are to operate depending on whether the gates are to open inwards or outwards.
Inward Opening Double Leaf Gate
For gates that open inwards, The Kit Simply can operate a specific handed gate leaf before the other. This
comes into play where there is a “lip” on a gate leaf which keeps the gates together or there are specific
requirements to have one leaf open before the other.
Please follow the wiring diagram below for the connection to the Q60AR Swing Gate Control Board if:
First leaf to open is the left hand side:
First leaf to open is the right hand side:
To Next Page
Loading...
