8
Insert the hexagonal release key (included in the fixing pack) and turn 90° . See pictures O/P.
Now proceed to manual opening. To lock back the operator, insert the key and turn 90° .
The gate can be locked in any position since after the first start command the system will return to its default settings
4. MANUAL RELEASE
5. MAINTENANCE
Periodic maintenance is needed. We suggest checking the state of lubrication and tightness of the anchoring
screws on the operator as well as the good operation of all safety devices.
6. WARRANTY
All goods supplied by PROTECO are covered by a limited warranty of 3 years from the production date printed on the product.
In this period, Proteco Srl offers a free guarantee against malfunction due to defects in workmanship and materials.
Any form of guarantee provided here is strictly conditional upon compliance with the instructions for use and
maintenance. The limited warranty does not apply when the goods are not PROTECO’S originals and the fault comes from an incorrect installation or
is due to force majeure.
The installation and any maintenance works are the responsibility of who installs the system.
Under no circumstances and in no way Proteco Srl will be liable for damages, including any
loss of profits, savings, or other incidental or consequential damages, resulting from the use or inability to use the PROTECO products.
Any return coming without previous authorization will be rejected.
Returning shipping costs will be at customer’s charge.
All faulty items have to be returned along with the according invoice to:
PROTECO Srl Via Neive 77, 12050 Castagnito (CN) - Italia
The limited warranty is not applicable when:
- Goods have been handled or stored in abnormal use and maintenance conditions
- Goods have been repaired, changed and altered by unauthorized personnel
- Goods have been subject to incorrect use, neglect, electrical problems, improper packaging, accidents or natural events
- Goods have been installed in an improper way.
- The label of the product warranty is illegible or missing.
- Bad operation is due to incorrect installation, natural or accidental events (falls, surcharges, oxidation)
7. PHASING OUT AND DISPOSAL
DO NOT DISPOSE OF IN NATURE!
Some components may contain hazardous waste. They must, thus, be removed and turned in to licensed firms
for their disposal. Before acting always check the local laws on the matter.
Pic. O
Pic. P
left motor
right motor
To Next Page
Loading...
Need help?
General
