Protekt RJ200 - Inspection of the Device after Arresting a Fall; Additional Important Information

DAVIT
INSTRUCTION MANUAL
EN 795:2012 Class B
Reference number:
RJ200
BEFORE USE READ THIS MANUAL CAREFULLY
edition: 3/25.02.2019 pl
p.
5
Inspection of the device after arresting a fall
When the device RJ200 has been used to arrest a fall, it must be withdrawn from use immediately and inspected by a
competent person. In case of any doubts please contact the manufacturer.
Additional important information
• Before working with use of the device RJ200 always draw a plan of a potential rescue action after arresting a fall.
• Use the device after inspection only.
• Limit the access of unauthorised personnel to working area of the device.
• Before working with use of the device RJ200 please check if all pins and cotters are present and installed correctly.
• Keep location where the device is used clean and tidy.