Need help?Do you have a question about the Proteus EEC - 1850 and is the answer not in the manual?
Attaching foot caps to front and rear stabilizers and securing them with foot adjust bases.
Connecting extension and lower cables, inserting tension cable, and fitting handlebar post for EEC-1800 model.
Connecting monitor cables (A & B) and fitting handlebar post for EEC-1850 model.
Assembling axle spacer, wave washer, pivot caps, and handrails using bolts and washers.
Sliding connecting arm into handrail, adjusting pedal arm height, and tightening with knob.
Assembling tension control, connecting cable, and mounting onto handlebar post with screw and washer.
Connecting extension cable and grip pulse wire to the computer, then fixing computer onto handlebar post.
Connecting monitor cable (A) and grip pulse wire to the computer, then fixing computer onto handlebar post.
General| Resistance Levels | 16 |
|---|---|
| Stride Length | 18" |
| Programs | 12 |
| Heart Rate Monitoring | Yes |
| Resistance Type | Magnetic |
| Display Type | LCD |
| Maximum User Weight | 135kg / 297lbs |
| Max User Weight | 135kg / 297lbs |
To Next Page
