Proteus IMT-7500 - Programs Selection; Program Graph

PROGRAM
1 (MANUAL)
PROGRAM
2 (POLLING)
PROGRAM
3 (VALLEY)
PROGRAM
4 (FAT BURN)
PROGRAM
5 (RAMP)
PROGRAM
6 (MOUNTAIN)
PROGRAM
7 (RANDOM)
PROGRAM
8 (BODY FAT)
PROGRAM
9 (TARGET H.R.)
PROGRAM
10 (60% H.R.C.)
PROGRAM
11 (75% H.R.C.)
PROGRAM
12 (85% H.R.C.)
PROGRAM
13 (USER SETTING)
PROGRAM
14 (USER SETTING)
PROGRAM
15 (WATTCONTROL)
D. PROGRAMS SELECTION :
THERE ARE 15 PROGRAMS WITH 1 RECOVERY INCLUDING 1 MANUAL PROGRAM, 6
PRESET PROGRAMS, 1 BODY FAT PROGRAM, 4 HEART RATE CONTROL PROGRAMS, 2
USER SETTING PROGRAMS, 1 WATT CONTROL PROGRAM, AND 1 PULSE RECOVERY
MEASURING.
E. PROGRAM GRAPH :
EACH GRAPH SHOWN IS THE PROFILE OF THE LOADING IN EACH COLUMN. WITH THE
VALUE OF TIME COUNTING UP, EACH COLUMN IS 3 MINUTES THAT ALL THE COLUMNS
MAKE UP 30 MINUTES. WITH THE VALUE OF TIME COUNTING DOWN, EACH COLUMN IS
THE VALUE OF SETUP TIME DIVIDED BY 10. FOR EXAMPLE, IF THE TIME VALUE IS SETUP
TO 40 MINUTES, EACH COLUMN WILL BE 40 MINUTES DIVIDED BY 10 COLUMNS ( 40/10=4 ).
THEN, EACH COLUMN WILL BE 4 MINUTES. THE FOLLOWING GRAPHS ARE ALL THE
PROFILES IN THE MONITOR.
- 4 -