10
Bluetooth /2.4G/Wireless Barcode Scanner
Pair with Android, iOS operating system
smartphones or tablets or PC terminals
that with Bluetooth function
(Bluetooth Pairing Steps)
C: Scan the barcode below to search the bluetooth device to enter
pairing status ( or trigger twice to exit pairing mode and get back to
non-pairing state).
Method 2：
A
: Start the scanner and scan “ Enter Setting Mode” barcode.
B: Scan “Bluetooth HID Mode” barcode
D: Turn on Bluetooth in the device and detect “Barcode Scanner HID”.
E: Click "Barcode Scanner HID" to enter pairing status.
F: If pair successfully, you will hear a beep.
G: Scan “
Exit Setting Mode”
barcode to exit.
A: Start the scanner and long press for 8 seconds to enter
“Bluetooth HID Pairing Mode" .
B: Turn on Bluetooth in the device to detect bluetooth device
named with "Barcode Scanner HID".
C: Click "Barcode Scanner HID" to enter pairing status.
D: If pair successfully, you will hear a beep.
Method 1:
To Next Page
Loading...