13 14
Active Safety SystemActive Safety System
Lane Departure Warning
When the vehicle speed is more than 60 km/h, the lane
departure warning system function activates automatically.
The system exits when the vehicle speed is less than 55 km/h.
Instrument alarm interface
The dotted line
①
indicates that the lane is detected.
This dotted line will not appear if the lane is not detected.
Dotted line
②
flashes in yellow to indicate that the vehicle is off
the lane.
Pre-Collision Warning System (PCS)*
Intelligent High Beam Control
The pre-collision warning system monitors the
distance and relative speed of other vehicle the
front. If the driver brakes too late, the braking
force is too small, or there is no braking at all,
the system will take action to assist the driver to
avoid or mitigate the collision.
When the pre-collision warning system
triggers,
there will be an alarm with pictures and words
on the combined instrument.
Af ter the IHBC function is activated, the IHBC system
will recommend to turn on the high beam when all of
the following conditions are met:
▪ The vehicle speed is ≥ 40km/h;
▪ Relevant traffic participants or other light sources
are not detected.
The IHBC system will
recommend to turn on the low
beam when any of the following conditions are met:
▪ The vehicle speed is ≤ 25km/h;
▪ Relevant traffic participants or other light sources
are detected.
1 2
To Next Page
Loading...