EasyManua.ls Logo

Proton X70 2024 - Seat Belt; Three-Point Seat Belt; Shoulder Belt Height Adjuster

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
7
6
5
4
3
2
1
10
Quick GuideQuick Guide
Rear Seat Seatback Angle
Adjustment
Press the unlocking buttons on both
sides of the rear seatback.
Push the seatback backward pr pull
forward to adjust the seatback angle
(notch position).
Fold Unfold Rear Seatback
Put the rear seat headrest to the
lowest position.
Pull up the unlocking lever at the top
part of the rear seat’s seatback.
Fully fold the seatback on the
corresponding side.
Unfold and and push the seatback
backwards to restore its position.
Seat Belt
Three-point Seat Belt
1. Pick up the latch plate and pull the
seat belt across your body. Do not
twist the seat belt.
2. Press the latch plate into the buckle
until a “click” sound is heard.
3. The lap belt (hip belt) can be tightened
if the shoulder belt is pulled up.
Shoulder Belt Height
Adjuster*
1. Adjust the height of shoulder belt to
the middle of your shoulder.
2. The seat belt should be far from the
face and neck but not below shoulder.