3. While pressing the release button,
slide to move the shoulder belt height
adjuster up or down.
4. Make sure the the adjuster is locked
properly
Seat Belt Reminder
Seat belt unfastened warning lamp will
turn on when the seat belt is not fastened.
The corresponding seat will be displayed
as red at meter instrument display screen.
Except for driver’s seat, the warning lamp
will not turn on if there’s no one sitting on
the front passenger or rear seat.
Buzzer will be triggered with the warning
lamp when vehicle is moving only.
11
Quick GuideQuick Guide
Child Restraint System (CRS)
Before installing any child restraint system, make sure the headrests are removed
(only applicable to seatback with removable headrest).
Child Weight Group Recommended CRS
Group 0: <10 kg Britax Baby Safe Plus with ISOFIX Base
Group 0+: <13 kg Britax Baby Safe Plus with ISOFIX Base
Group I: 9-18 kg Britax Duo Plus
Group II: 15-25 kg -
Group III: 22-36 kg -
When full-sized rearward facing toddler CRS is installed on a rear seat, the front
seat’s seatback angle should be adjusted with upright angle corresponding to a
torso angle of 15 degrees, then the CRS can be installed correctly without interference
with front seat.
To Next Page
Loading...