5
Quick GuideQuick Guide
Intelligent Entry System
Keyless Locking
Type I
Locking sensor area
• Turn OFF ignition switch.
• Close all doors and tailgate.
• Place your hand on the locking
sensor area at the driver side or the
front passenger side door handle.
• After successful locking, the turn
signal lamp will ash once.
Type II
Door Lock interface
• On Door Lock interface, select the
Walk Away Auto Lock.
• This will enable or disable the
automatic keyless locking function.
• Close all doors.
• Walk away from the detection range
with the valid intelligent key.
• Vehicle will be locked automatically.
Keyless Unlocking
Type I
Unlocking sensor area
• Carrying a valid intelligent key, within
1 meter from the driver side door.
• Insert your hand into the unlocking
sensor area behind the exterior driver
door handle.
• All doors will automatically unlock.
• After successful unlocking, the turn
signal lamp will ash twice.
Type II
• Enable Nearby Auto Unlock Door
function in multimedia display setting.
• Carry a valid intelligent key, and walk
towards the vehicle within the key
detection range.
• The vehicle will be automatically
To Next Page
Loading...