12
3 Machine features
Accessories shown or described are some-
times not included in the scope of delivery.
The specified illustrations appear at the
beginning of the Operating Instructions.
4 Intended use
Cordless impact drills are suitable for
– drilling in metal, wood, plastic and simi-
lar materials,
– impact drilling into walls, concrete and
similar building materials,
– inserting and tightening screws
Charger BCL 3 is suitable for
– charging battery packs: Protool BP, Fes-
tool BPS and BPC (NiMH, NiCd, li-ion are
recognised automatically.)
– internal use only.
The user is liable for improper or non-
intended use; this also includes con-
tinuous industrial operation.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warn-
ings and all instructions. Failure to
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings re-
fers to your mains-operated (corded) pow-
er tool or battery-operated (cordless) pow-
er tool.
5.2 Machine-related safety in-
structions
– Wear ear protection when impact
drilling. Exposure to noise can result in
loss of hearing.
– Use auxiliary handle, if supplied
with the tool. Loss of control can cause
personal injuries.
– Hold power tool by insulated grip-
ping surfaces, when performing an
operation where the cutting acces-
sory may contact hidden wiring or
its own cord. Cutting accessory con-
tacting a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric shock.
– The charger and power tool are not
intended for use by persons (includ-
ing children) with limited physical,
sensory or mental ability or without
sufficient experience and/or knowl-
edge, unless they are supervised by
a person responsible for their safety
or have been instructed on how the
charger or power tool is to be
used.Children should always be super-
vised to ensure that they do not play
with the charger or the power tools.
– Wear suitable protection: such as ear
protection, safety goggles, a dust mask
for work which generates dust, and pro-
tective gloves when working with raw
materials and when changing tools.
CAUTION! Rebound!
Rotation: Switch off device immedi-
ately!
Wear protective gloves.
Wear protective goggles.
Do not throw in the household
waste.
[1-1] LED light switch
[1-2] LED lamp
[1-3] Bit store
[1-4] On/Off switch
[1-5] Clamping sleeve
[1-6] Drilling/impact drilling selector
switch
[1-7] Gear switch
[1-8] Torque thumbwheel
[1-9] Right/left switch
[1-10]Belt clip
[1-11]Button for releasing the battery
pack
[3-1] LED-Display
[3-2] Cable holder
[4] Wall mount
To Next Page
Loading...
Need help?
General
