Need help?Do you have a question about the Protouch prowarm ProTouch V2 and is the answer not in the manual?
Details the meaning of various icons and indicators shown on the thermostat's screen.
Lists the primary operational capabilities and features of the thermostat.
Provides key technical details including voltage, load, power, and wire diameter.
Instructions for detaching the thermostat's front panel from its back section.
Guidance on connecting the electrical wires according to the wiring diagram.
How to turn the thermostat on and off, including frost mode behavior.
Adjusting the current temperature temporarily and reverting to automatic schedule.
Instructions for choosing between different operating modes like Auto, Manual, and Holiday.
Procedure for setting the current time and day on the thermostat.
How to lock and unlock the thermostat's controls to prevent unintended changes.
Option to adjust the brightness level of the thermostat's display.
Customizing the heating schedule for different times and temperatures in AUTO mode.
Calibrate temperature readings from room or floor sensors for accuracy.
Configure frost protection and set maximum allowable floor temperature.
Adjust temperature change threshold for switching and select display unit (°C/°F).
Choose sensor input (Room, Floor, Both) and schedule formats (7, 5+1+1).
Enable adaptive heating and window open detection for energy saving.
Configure output delay for heating stability and set power limits.
Restore all thermostat settings to their original default values.
Troubleshooting common sensor errors like short-circuit or disconnection.
Provides the physical dimensions of the thermostat in millimeters.
Diagram and guidelines for connecting power supply and floor sensor.
Important safety note advising to disconnect power before wiring.
General| Brand | Protouch |
|---|---|
| Model | prowarm ProTouch V2 |
| Category | Thermostat |
| Language | English |
To Next Page
