c)
Direct thedischarge of the spinning wirebrush
away fromyou. Small particles and tinywire frag-
ments may be discharged at high velocityduring the
use
of these brushesand maybecome imbedded in
your skin.
Protection class II device
Wear safety glasses!
Useindoors only
Please do not dispose offthe machine!
Description of themachine
The PROXXON IBS/E industrial drill/grinder is the ideal
device formicro drilling, milling, grinding, polishing,
brushing, removing rust,engraving, chasing and sepa-
rating. Youcan work on anytype of material such as
steel, non-ferrous metals, glass, wood, minerals and ce-
ramics:Youwill find the matching tool forany task in our
comprehensiverangeofaccessories. 34 bits and cutters
(with2.35 mm shaft) are included in the scope of deliv-
ery.
The precision drill spindle is supportedfree from play
through two precision ballbearings in the aluminiumdie-
cast head: This guaranteesalong servicelife and accu-
rate concentricity.
Aquiet specialmotor with permanent magnets with elec-
tronicspeedcontrol ensures maximumperformanceat
minimumsize,the speedrangeof5,000to22,000 rev-
olutions per minutepermits greatflexibility whilst work-
ing. The compact high-strength housing is made of
glass-fibrereinforced polyamide.
With the 20 mm fit at the front device end,the device
can be clamped into e.g. drill standorother device hold-
ers from our range.
Thesupplied steel colletchuck makesiteasy to change
tools and offers asignificantly greater concentric accu-
racythan adrillchuck.
Legend
1.
Speed controlbutton
2. ON-OFF-switch
3. Hanger
4. Mains supply cable
5. Locking button
6. Spigotnut with steel clamp jaw
7. Fittingcollar for drill stand(Ø20mm)
8. Steel clamping jaws
9. Chuckkey
Technicaldata
Length: approx. 250 mm
Weight: approx. 500 g
Collar: Ø20mm
Motor
Voltage: 230 V, 50/60 Hz
Rotaryspeed: 5,000 -22,000 rpm
Power consumption: max. 100 W
Noise development: ≤ 70 dB (A)
Vibration in the handle: ≤ 2,5 m/s
2
Please notethatthe sound and vibration measurements
in particularhavebeen performed with Proxxon bits and
cutters. When usingthird-party brands we cannotguar-
antee compliance with the statements givenhere!
Scope of delivery
1pc. IBS/E long-neck professionaldrill/grinder
1pc. Storagecase
1pc. Operating instructions
1pc. Safety guidelines
1pc. Key
6pcs. Collets (1.0-1.5-2.0-2.4-3.0 and 3.2 mm)
1pc. Round grinding pin Ø5mm
1pc. Cylindergrinding pinØ6mm
1pc. Cylindergrinding pinØ2.5 mm
1pc. Cup grinding pin Ø7mm
1pc. Tungstencarbide micro drill Ø0.5 mm
1pc. Tungstencarbide micro drill Ø1mm
1pc. Diamond-coatedgrinding pinØ1.8 mm
-15-
To Next Page
Loading...
Need help?
General
