- 4 -
Operating Instructions
PROXXON-MICROMOT
Motorized Carver SGM
Dear customer,
Congratulations on your purchase of a PROXXON
MICROMOT Motorized Carver SGM. Here you have
the ideal unit to cut all types of wood, to carry out reno-
vation and general work with furniture and antiques, to
carve wood, sculptures or plaster, to cut linoleum, and
many more applications as well.
Before putting the machine into operation, read the fol-
lowing safety rules and operating instructions.
For your safety: Never connect the plug to the power
source receptacle until the assembly and adjustment
steps are completed, and you have read and under-
stood the safety and operating instructions.
To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a power source
receptacle during unpacking and assembly. This cord
must remain unplugged whenever you are working on
the SGM.
These instructions include:
1. Safety regulations
2. Operating information
3. Lists of spare parts with exploded diagrams
The scope of supply includes:
1 pc. SGM motorized carver for 115 V
1 pc. Chuck key
1 pc Blade inserts (3 shapes, bimetallic): U, V
and flat blade
The SGM offers you:
1. Maximum operating comfort and convenience
thanks to an ergonomically shaped case.
2. Low weight for optimum handling and to minimize
tiredness when working.
3. A gearbox casing made of die cast zinc for precise
locations of the ball bearings and more stability
under extreme loading.
4. A quiet, powerful and maintenance-free 24-pole
motor.
5. Electrical safety to protection class 2.
Please read these safety instructions and operating
instructions thoroughly before using the unit for the first
time.
So you will be able to:
1. get to know your motorized carver better
2. avoid problems due to incorrect handling
3. increase the life of your motorized carver
4. minimize the risk of injuries, and
5. use your SGM motorized carver more effectively.
Before putting the machine into operation, read the enclo-
sed safety rules and operating instructions. Warning!
Read and understand all instructions. Failure to follow
all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
Save these instructions.
SAFETY REGULATIONS:
1. Avoid untidiness in the working area.
2. Check the unit for damage each time before it is
used (connecting cable, protective devices, etc.),
and have defective parts replaced by a technician.
3. This unit complies with the relevant safety instruc-
tions. Repairs (such as replacing the mains cable)
should only be done by an electrician.
4. Never work without the safety devices provided.
5. Do not operate electric tools in the rain, in a damp
environment, or in the vicinity of inflammable liquids
or gases.
6. Only use the tool, if the handle is dry and free of
grease.
7. Avoid body contact with earthed parts such as
pipes, radiators, electric stoves and refrigerators.
8. Protect the connecting cable against heat and
sharp edges and run it along the ground in such a
way that it does not get damaged.
9. Do not pull the plug out of the socket by pulling on
the cable.
10. Do not lift the unit by the cable.
11. Keep children and unauthorized persons away from
the working area.
12. Keep unused tools away from children.
13. Do not overload the tool.
14. Do not use the tool for work for which it is not inten-
ded.
15. Change blunt tools in good time.
16. Check the tools used each time before starting
work by means of a visual check to ensure they are
undamaged and suitable for the intended purpose.
17. Firmly attach or clamp the work piece.
18. Thoroughly clean the unit after work (unplug it from
the mains first).
19. Pull out the mains plug if the unit is not being used,
before maintenance, before changing the tool or
making repairs.
20. Only insert the mains plug when the unit is switched
off.
21. Always wear protective glasses (danger of the tool
breaking).
22. Wear a dust mask, if necessary.
23. Only wear suitable work clothing (no loose sleeves,
ties, jewelry).
24. Wear a hair net, if you have long hair.
25. Only use accessories and spare parts that have
been recommended by PROXXON
26. Use a dust extraction device if necessary (but only
use suitable dust extraction devices, in such a case
due to the danger of fire from sparks).
27. Do not use the tool if you cannot concentrate pro-
perly or if you have been drinking.
To Next Page
Loading...
