Need help?Do you have a question about the Proxxon FF 400 and is the answer not in the manual?
General| No-load speed | 5, 000 - 20, 000 rpm |
|---|---|
| Table Size | 200 x 200 mm |
| X-axis travel | 200 mm |
| Y-axis travel | 200 mm |
| Z-axis travel | 200 mm |
| Weight | Approx. 90 lb (41 kg) |
Details the machine's physical build and components.
Lists items included with the KT 400 and PF 400.
Diagram and list of parts for the PF 400 milling machine.
Diagram and list of parts for the KT 400 compound table.
Specifications like voltage, power, speeds, dimensions, weight.
Instructions for mounting the machine onto a PD400 lathe.
Steps to attach the milling unit to the compound table.
How to adjust the milling spindle's height.
How to adjust spindle height with the hand wheel.
How to use the drill lever for feeding.
Instructions for pivoting the milling spindle on two axes.
Adjusting the milling spindle's vertical axis.
Adjusting the milling spindle's longitudinal axis.
General advice and safety for milling operations.
Procedure for setting the milling depth.
Instructions for replacing the drive belts.
Parts breakdown for the PF 400 milling unit.
Parts specific to PF 400, not included in FF 400.
Parts that are not illustrated in the diagram.
To Next Page
