EDDYTHERM operating manual
10
Type
Ser.Nr.
Herst.Dat.
V˜/A
COSφ
kW/kVA
Hz /Phasen
CISPR 11/IEC 55011 Klasse B
Zeichn.Nr.
Gew., kg
PRÜFTECHNIK
Alignment Systems GmbH
D-85737 Ismaning
www.pruftechnik.com
Operating notes
To ensure that the equipment operates smoothly, note the following instructions.
Temperature range
Operation
The allowable operating temperature is between 0°C and 40°C. Higher temperatures may lead to the destruction of
the components. The device can be used at relative humidity levels of up to 90% and at altitudes up to 3000 m.
Storage and transport
Store and transport the EDDYTHERM device at temperatures between -20° C and 60° C.
Storage and transport can take place at a relative humidity of up to 90% and at any altitude. Always use the original
packaging when transporting the equipment.
Type label
The type label is located on the lower left side of the EDDYTHERM 4X unit (see illustration on page 12) or on the
underside of the EDDYTHERM Ix and I-6 units.
To Next Page
Loading...
Need help?
General