Prusa Original Prusa i3 MK2 User Manual

Defines key terminology used throughout the manual for clarity and understanding.

Outlines legal disclaimers regarding printer use and the open-source licensing information.

Crucial safety guidelines for operating the 3D printer to prevent injury and damage.

Details the required filament diameter (1.75mm) and warns against using incompatible sizes.

Step-by-step instructions on how to safely unpack and handle the 3D printer.

Covers the process of assembling the printer kit and preparing it for use.

Details how to clean and prepare the PEI print surface for optimal adhesion.

Provides methods to enhance print adhesion using additional solutions when needed.

Instructions for connecting power and performing the printer's self-test routine.

Outlines critical steps for preparing the Z-axis and probe for calibration accuracy.

Covers checking Z-axis alignment and the procedure for loading filament into the extruder.

Guides on adjusting the Z-axis live during calibration for optimal first layer.

Recommends securing the probe with threadlocker to maintain calibration stability.

Emphasizes preheating and watching the initial layers for successful print adhesion.

Explains how to control the printer using the LCD panel or a USB connection with software.

Describes the functions and layout of the printer's LCD screen interface.

Discusses adjusting print speed versus quality and using USB connectivity.

Introduces available printer upgrades and different nozzle types for specialized printing.

Lists resources for downloading and software for creating 3D models.

Explains how to use Slic3r to convert 3D models into printable G-code files.

Covers printing in color and using support material for complex models.

Details methods for printing models that exceed the printer's build volume.

Details properties and settings for ABS, PLA, PET, HIPS, PP, and Nylon filaments.

Details the properties and printing considerations for flexible filament materials.

Guides on print surface preparation and clearing clogged or jammed extruders.

Explains procedures for cleaning and replacing the printer's nozzle.

Covers ensuring axis fluency and managing filament flow problems.

Discusses causes of model breakage and how to prevent it, including material choice.

Addresses issues with nozzle-to-bed gaps and prints stopping unexpectedly.

Guides on resolving SD card read errors and ensuring proper belt tension.

Advises on securing heatbed cables and zip ties for proper operation.