Need help?Do you have a question about the Prusa i3 MK2S KIT and is the answer not in the manual?
General| Build Volume | 250 x 210 x 200 mm |
|---|---|
| Layer Height | 0.05 - 0.35 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Print Speed | 200 mm/s |
| Connectivity | USB, SD Card |
| Nozzle Temperature | Up to 300 °C |
| Dimensions | 420 x 420 x 380 mm |
| Frame Material | Steel |
| Supported Materials | PLA, ABS, PET, Nylon |
| Print Technology | FDM (Fused Deposition Modeling) |
| Power Supply | 24V |
| Firmware | Marlin |
| Bed Type | Heated bed with PEI print surface |
To Next Page
