Prusa i3 MK2S KIT - L CD L Ayout

7.2.4 LCD layout
Items not mentioned below are not used for the common print setup - you should not
change any of the unmentioned items unless you are absolutely sure what you are
doing.
❏ Info screen
❏ Live adjust Z (during the printing process only)
❏ Tune (during the printing process only)
❏ Speed
❏ Nozzle
❏ Bed
❏ Fan speed
❏ Flow
❏ Change filament
❏ Mode
❏ Pause print (during the printing process only)
❏ Stop print (during the printing process only)
❏ Preheat
❏ ABS - 255/100
❏ PLA - 215/55
❏ PET - 240/90
❏ HIPS - 220/100
❏ PP - 254/100
❏ FLEX - 230/50
❏ Cooldown
❏ Print from SD
❏ Load filament
❏ Unload filament
❏ Settings
❏ Temperature
❏ Nozzle
❏ Bed
❏ Fan speed
❏ Move axis
❏ Move X
❏ Move Y
28