Prusa i3 MK2S KIT - L Oose X - a Nd;Or y -Axis B Elts

13.4 Loose X- and/or Y-axis belts
Check if both belts are properly tightened, loose belts would cause a printer malfunction and
prevent proper printing. The easiest way to check is printing a round object - if any of the
belts are not tightened properly the result is an irregular shape instead of a perfect circle.
Y-axis belt is located under the heatbed, X-axis belt moves the extruder. See the pictures
with properly tightened belts.
Pict.   33   -   A   properly   tightened   Y-axis   belt   under   the   heatbed
Pict.   34   -   A   properly   tightened   X-axis   belt
56