Prusa i3 MK2S KIT - 2 Roduct D Etails; 3 Ntroduction

2 Product details
Title: Original Prusa i3 MK2S / Original Prusa i3 MK2S (kit), Filament: 1.75 mm
Manufacturer: Prusa Research s.r.o., Partyzánská 188/7A, Prague, 170 00, Czech Republic
Contacts: phone +420 222 263 718, e-mail: info@prusa3d.com
EEE group: 3 (IT and/or telecommunication equipment), Device use: indoor only
Power supply: 90-135 VAC, 2 A / 180-264 VAC, 1 A (50-60 Hz)
Working temperature range: 18 °C (PLA)-38 °C, indoor use only
Working humidity: 85 % or less
Kit weight (brutto / netto): 9.8 kg / 6.3 kg, assembled printer weight (brutto / netto): 12 kg /
6.3 kg. Serial number is located on the printer frame and also on the packaging.
3 Introduction
Thank you for purchasing our original 3D printer Original Prusa i3 MK2S from Josef Prusa
either as an assembled printer or a printer kit - as your purchase supports us with its further
development. Read the handbook carefully, please, all chapters contain valuable info for the
correct service of the printer. Original Prusa i3 MK2S is a successor to Original Prusa i3
MK2 with small hardware tweaks for easier assembly and improved reliability.
Please check the http://prusa3d.com/drivers page for updated version of this 3D
printing hanbook (PDF download).
In case of any printer related problem do not hesitate to contact us at info@prusa3d.com  .We
are glad to receive all your valuable comments and tips. We strongly suggest you to visit our
official forum at forum.prusa3d.com, where you can find solutions to common issues, tips,
advice and hints in addition to actual information about the Original Prusa i3 printer’s
development.
3.1 Glossary
Bed, Heatbed, Printbed - Commonly used term for printing pad - a heated area of 3D
printer where 3D objects are printed.
Extruder - Printing head or extruder is a part of a printer consisting of a nozzle, hobbed
pulley, idler and a nozzle fan.
Filament - Term for plastic provided on spool is called “filament”, it’s used throughout this
handbook as well as in the LCD menu on the printer.
Heater, Hotend - other name for a printing nozzle.
1.75 - 3D printers use two different diameters (thickness) of a filament (thickness): 2.85 mm
(commonly called as 3 mm) and 1.75 mm. 1.75mm version is more used worldwide though
there is no difference in printing quality.
6