PRx Performance Profile ONE Squat Rack with Pull-Up Bar - All Parts & Tools Needed

Prole Upright 2x3
5/8” x 4” Hex Head Bolt
5/8” x 3 1/2” Hex Head Bolt
4
42” Pull-Up Bar
1
9
12
16
2
2
15
11
14
8
11
10
1
17
13
9
5
6
3
Item No.
1
Qty.
2
Description
1/4” Wall Bracket
2 2
3 4Linkage Arm with Shock
4 1
5 85/16” x 2 1/2” Lag Screw
6 85/16” Flat Washer
7 4Shock Mount
8 41/4” Flange Nut
9 8Plastic Spacer
10 45/8” x 1 3/4” Hex Head Bolt
11 205/8” Flat Washer
12 105/8” Nylock Nut
13 2
14 4
15 2Plastic Cap
16 1J-Cup
17 1J-Cup
Prole
®
ONE Squat Rack with Pull-Up Bar
All Parts & Tools Needed
9”
26.75”
2 (701) 566-0452
Tools Needed
Cordless drill
7/32” drill bit
Socket adapter
 Studnder
Level
Tape measure
 Pencil
 Plumbline
Ratchet
15/16” Socket
 15/16”Open-endedwrench
1/2” Socket
 7/16”Open-endedwrench
WARNING: SERIOUS INJURY
OR DEATH COULD OCCUR
IF PRECAUTIONS ARE NOT
TAKEN. PLEASE READ
WARNINGS ON PAGE 11.
Rack Specications
(WxHxD)
Folded Up:
52” x 108” x
Folded Down:
52” x 90” x
Weight Capacity:
1000 lbs