PRx Performance Profile ONE Squat Rack with Pull-Up Bar - Double Check Your Space; Stud Spacing; Ceiling Height; Wall Width

4 (701) 566-0452
69”
19”
88”
108”
16” 16” 16”
24” 24”
32” from obstruction 32” from obstruction
Double Check Your Space
Standard installation is designed for ceilings 108” or taller. If your ceiling is shorter than 108” please
see page 12 for modications, or contact PRx Performance.
1. Stud Spacing:AllProle®SquatRacksaredesignedtobemountedtowoodstudswithstandard16”
or24”spacing,withorwithoutdrywall.
• Tomountyourracktoawallwithnon-standardstudspacing,pleaseuseastringerboard.Formore
informationpleaseemailusat support@prxperformance.com.
• PRxrecommendsprofessionalinstallationformountingthewallbracketstoablock,concrete,or
metalstudwall.
2. Ceiling Height:Standardinstallationisdesignedforceilings108”ortaller.Ifyourceilingisshorter
than108”pleaseseepage12formodicationstoyourinstallation.Ifyouhaveanyquestionsabout
thesemodicationspleaseemailusatsupport@prxperformance.com.
3. Wall Width:Makesureyouhaveatleast32”oneithersidefromwhereyourrackwillbeinstalled.
ThiswillprovideenoughroomforusewithanOlympic20kgbarbell(86”).