Need help?Do you have a question about the PS Audio P3 and is the answer not in the manual?
General| Voltage Display | Yes |
|---|---|
| Type | Power Regenerator |
| Input Voltage | 90-140V |
| Input Frequency | 50/60Hz +/- 5Hz |
| Output Voltage | 120VAC +/- 0.5% |
| Continuous Output | 300 watts |
| Peak Output | 900 watts |
Essential safety guidelines and warnings for operating the PS Audio P3 unit.
Acknowledgement of customer purchase and introduction to the product.
Explanation of how the P3 maintains audio dynamics and soundstage.
Details on the product's construction quality and testing in Boulder, Colorado.
Clarification of voltage and Volt-Amp ratings and their implications for load.
Guidance on selecting an appropriate place to set up the P3 unit.
Information on how to mount the P3, including stackability and ventilation.
Discussion on using isolation devices to improve the P3's performance.
Advice against using other power conditioning equipment before or after the P3.
Details on connecting the P3 to a network for extended functionality benefits.
Recommended procedure for powering down system components before connecting the P3.
Guidance on selecting the optimal AC receptacle for connecting the P3.
Recommendation for using high-quality power cables for optimal performance.
Explanation of how to use power zones to isolate different types of equipment.
Description of the HC zone, which provides filtered/protected AC, not regenerated.
Steps for powering up the P3 unit and understanding its display indicators.
Indicator status for displaying current input voltage upon powering on.
Functionality to adjust the output voltage using remote control arrow buttons.
Indicator for a viable internet connection status.
Status indicator showing the P3 outputting 90% of its potential.
Status indicator showing the P3 outputting 100% of its potential, warning of overload.
Overview of methods to control the P3: remote, internal webpage, and GlobalNet.
Details on using the included remote control for direct operation of the P3.
Function of the Power button to cycle zones and the display.
Toggles waveform between Multiwave and Sinewave for enhanced audio performance.
Function of the display button to revert to default voltage/wattage view.
Buttons used to increase or decrease the output voltage of the P3.
Indicates this button has no function with the P3.
Activates degaussing feature to remove magnetic charges for improved audio performance.
Accessing and controlling the P3 via an internal webpage on the Local Area Network.
Snapshot of current status, including voltage, THD, and wattage readings.
Advanced features for changing device name, labeling outlets, and switch modes.
Option to enter a description for the P3 to help remember its location.
Ability to label each outlet to match the device connected.
Defines how outlets interact with the Master Power button (Always On, Switched, Delayed, Program Delay).
Outlet can be rebooted through the web interface.
Automatic rebooting of outlets based on web connection status or defined delays.
Controls for modifying the network settings of the Perfect Wave P3.
Setting a custom host name for easier access to the P3 via a browser.
Configuration for DHCP or static IP address setup for network connectivity.
Controlling and monitoring the P3 from anywhere via PS Audio's GlobalNet website.
Overview of the Control Panel, showing status and enabling power cycling.
Powerful page for labeling outlets, toggling zone power, and setting switch modes.
Procedure to label each outlet to match the device connected.
Function to turn power to a selected zone on or off via the Power Switch.
Options to change how outlets interact with the Master Power button (Always On, Switched, Delayed).
Outlet can be rebooted through the web interface.
Automatic rebooting of outlets based on web connection status or defined delays.
Configuring email alerts for system problems and status notifications.
Monitoring incoming power conditions and wattage consumption over time.
Configuring wattage tolerances and actions based on exceeded limits.
Monitoring IP devices and rebooting based on failed responses (network watchdog).
Entering the IP address of a device for the P3 to monitor.
Setting the number of failed responses before initiating a reboot or alert.
Enabling future reboot, on, or off events using a calendar and custom scheduling.
Identification and instruction for the P3's back panel connectors and hardware.
Input/output connectors for 12-Volt Trigger operations and IR controls.
Necessary for firmware updates if a network connection is unavailable.
Conditions and limitations that may void the warranty, including misuse and unauthorized repair.
The purchaser's sole remedy for product failure under the Limited Warranty.
Exclusions from warranty coverage, such as cosmetic damage and unauthorized repairs.
Information on obtaining warranty service through international dealers and distributors.
Procedure for discussing issues and obtaining repair authorization in North America.
Requirements for displaying Return Authorization numbers for service.
PS Audio Service Department contact details: phone, hours, fax, email, website.
Steps for obtaining an R/A number and shipping address for service within the US.
Instructions for contacting country-specific dealers/distributors for service outside the US.
Steps for obtaining RA number and shipping address from dealer/distributor.
Information about voltage and frequency conversions available only at time of purchase.
Field to record the PS Audio product serial number for reference.
Fields to record dealer/distributor and date of purchase for warranty validation.
To Next Page
