To Next PageTo Next Page
Need help?Do you have a question about the PS Engineering PMA7000S and is the answer not in the manual?
General| Headphone Outputs | 2 |
|---|---|
| Intercom Channels | 4 |
| Bluetooth | Yes |
| Pilot Isolation | Yes |
| Soft Mute | Yes |
| Split Mode | Yes |
| Stereo | Yes |
| Music Mute | Yes |
| Input Impedance | 600 Ohms |
| Output Impedance | 150 Ohms |
| Type | Intercom System |
| Power Supply | 14-28 VDC |
| Inputs | Music 1, Music 2 |
| Frequency Response | 300 - 6000 Hz |
| Operating Temperature | -20°C to +55°C (-4°F to +131°F) |
| Distortion | Less than 1% THD |
Provides an overview of the PMA7000M-S capabilities and manual purpose.
Details the features and functions of the PMA7000M-S audio selector panel and intercom system.
Outlines the FAA approval standards and relevant documents for the PMA7000M-S series units.
Lists the technical specifications, including TSO compliance, environmental qualifications, and power requirements.
Details the components included in the PMA7000M-S installation kit.
Lists essential external components needed for installation and operation.
States that no specific licenses are required for the operation of this equipment.
Provides general guidance, prerequisites, and initial inspection procedures for installing the PMA7000M-S system.
Covers the steps and considerations for physically installing the PMA7000M-S unit, including mounting and connectors.
Provides guidance on assembling and connecting the wiring harness according to specifications and noise considerations.
Details power requirements, external push-to-talk, transmit interlock, swap mode, and backlighting.
Explains intercom wiring, unswitched inputs, and the setup of entertainment sources for the audio panel.
Covers installation of IRS, audio messages, marker beacon receiver, and associated components.
Details factory adjustments for unit functions and provides notes on antenna installation.
Explains wireless telecommunications interface, hook switches, and provides detailed pin assignments for connectors.
Outlines post-installation checks, operational testing, and final inspection procedures before aircraft certification.
Defines the scope of the operation section and provides an overview of system capabilities.
Explains how to select receiver audio sources and use the microphone selector for transceivers.
Details Split Mode, Swap Mode, and their associated ICS functions for varied communication scenarios.
Covers intercom modes, IntelliVox™™, volume control, and entertainment input integration.
Explains telephone mode usage, marker beacon indicators, and internal recorder system functions.
Outlines the conditions and duration of the factory warranty for the PMA7000M-S.
Explains how to obtain service, contact information, and return procedures.
Provides specific text and guidance for filling out FAA Form 337 for PMA7000M-S installation.
