Page 8 202-890-0702 PMA8000BT Pilot Guide Rev. 9
3. How many devices can I pair with the audio panel?
a. You can pair up to eight devices. After that, the audio panel
will “forget” one device when another is added. Due to the
nature Bluetooth, we can’t predict which device will be
dropped. If your desired device is dropped, simply re-pair the
one you want.
4. How many devices can I use at the same time?
a. You can connect multiple devices such as a Smartphone and an
iPad for music, but only one telephone can be connected to the
audio panel at a time.
5. Can I use a different music source other than my phone?
a. Yes, you can. However the music device, must be paired and
connected second, after the telephone is paired. In Smart-
phone such as Androids, you should specifically disable the
Bluetooth phone or music portion, depending on function to be
used. Note, if an iPhone is connected second, you may not be
able to stop it from taking over the music. Some phones must
manually select the PMA8000BT as an audio source for the
phone after the music is connected.
6. My Smartphone didn’t reconnect, what do I do?
A. It is possibly due to corruption of the stored information.
To reset the Bluetooth, turn the unit off. Put the pilot side
headset on. Hold down NAV2 and MKR switches at the same
time, and turn on the audio panel, continuing to hold both
switches for about 5 seconds, or until there is a "ding" sound
in headset. This clears all paired Bluetooth devices.
Apple iPhone users may have to set their Settings,
“Accessibility” selection for “Incoming Calls” and select
“Headset” instead of “Default.”
Hold button on power up Pairing Code
Nav 1 0000 (default)
Nav 2 1234
MKR 1111
To Next Page
Loading...
Need help?
General