PS Engineering PMA8000BT User Manual

9800 Martel Road
Lenoir City, TN 37772
www.ps-engineering.com
P
P
M
M
A
A
8
8
0
0
0
0
0
0
B
B
T
T
Document P/N 200-890-0702
Revision 1, Oct. 2010
Audio Selector Panel with Marker Beacon Receiver
High-fidelity Stereo Intercom
System Installation and Operation Manual
FAA- TSO C50c, C35d
EASA ETSO C50c, 2C35d
Patented under one or more of the following;
No. 4,941,187; 5,903,227; 6,160,496 and 6,493,450
PS Engineering, Inc. 2010 ©
Copyright Notice
Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed written permission of PS Engi-
neering, Inc. is strictly prohibited. For further information contact the Publications Manager at PS Engineering, Inc., 9800 Martel
Road, Lenoir City, TN 37772. Phone (865) 988-9800, email contact@ps-engineering.com.
In certified aircraft, warranty is not valid unless this product is installed by an
Authorized PS Engineering dealer.

PS Engineering PMA8000BT Specifications

General

Manufacturer	PS Engineering
Category	Control Panel
Bluetooth	Yes
Number of Intercom Positions	6
Pilot Isolate	Yes
IntelliVox	Yes
Split Mode	Yes
FAA TSO Compliance	Yes
Audio Outputs	4
Phone Interface	Yes
Music Input	Yes
Weight	1.5 lbs
Power Requirements	14-28 VDC

Summary

Section I - GENERAL INFORMATION

1.5 SPECIFICATIONS

Section II - INSTALLATION

2.3 EQUIPMENT INSTALLATION PROCEDURES

Outlines steps for mounting, wiring, and connecting the PMA8000BT unit.

2.4 CABLE HARNESS WIRING

2.12 OPERATIONAL CHECKOUT

Details the procedures to verify correct installation and functionality after setup.

Section III OPERATION

3.2 COMMUNICATIONS TRANSMIT (XMT) SELECTION

3.7 INTERCOM OPERATION

Covers intercom modes, volume controls, and IntelliVox® functionality.

3.11 SMART FUNCTION KEYS (SFK)

3.12 BLUETOOTH® INTERFACE

Details pairing, music streaming, and telephone call management via Bluetooth.

Section IV – Warranty and Service

4.1 WARRANTY

4.2 FACTORY SERVICE

Appendix A – External PTT Hook Up

Appendix E – Instructions for FAA Form 337 and continuing airworthiness

9.1 Instructions for FAA Form 337, Audio Panels

Appendix F – RTCA DO160D Environmental Qualification Form