EasyManuals Logo

PS Engineering PMA8000BT Pilot's Guide And Operation Manual

PS Engineering PMA8000BT
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
202-890-0702 Page 7Dec. 2016 PMA8000BT Pilot Guide
Quick reference PMA8000BT Operation
This pull-out section covers advanced operation of the PMA8000BT.
Bluetooth Connection
1. Turn on the PMA8000BT.
2. From your Bluetooth enabled device, search for other devices,
and select the PMA8000BT.
3. If an access code is required, enter “0000” to connect to the
PMA8000BT, unless this is changed (see FAQ #2)
You can now make and receive calls with the audio directed through
the audio panel, and stream music to Music input 1.
The Bluetooth module can be turned off, of desired, by pushing the
AUX and ADF buttons while the unit is being turned on. The module
will reset when unit power is cycled.
Bluetooth® FAQ
1. Some Bluetooth terms to know:
Hands Free audio panel acts as a hands free telephone hand-
set
Stereo headset the audio panel will receive music audio
streaming from the PMA8000BT.
Pairing is when two Bluetooth devices establish communica-
tion and “agree” to connect. This occurs the first time the devices
“meet” and they will store the information to reconnect easily in
the future.
Discoverable the PMA8000BT is always “discoverable.” That
means it will allow any Bluetooth device within range to detect
its presence and attempt to pair. Pairing will only occur when
both devices agree, so you will have to accept the pairing on your
device.
Connection this occurs when Bluetooth devices that have
been previously paired see each other again and reestablish their
communication. This can happen automatically, or by prompting
the user to accept the connection again. The PMA8000BT will
always look for paired devices when it is turned on, and connect
with the first one that allows connection.
2.What access code do I use?
a. If your phone requires an access code to complete the pairing,
you can use 0000 (all zeros). See the table if you wish to
change the audio panels access code to “1234,” or “1111”.

Other manuals for PS Engineering PMA8000BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PS Engineering PMA8000BT and is the answer not in the manual?

PS Engineering PMA8000BT Specifications

General IconGeneral
BrandPS Engineering
ModelPMA8000BT
CategoryControl Panel
LanguageEnglish