B)
OPERATING
CONTROLS
The positions of the controls are shown
in
the enclosed technical
data sheet.
Following some operating controls described
in
detail:
Locking and
unlocking
your
moped
To lock, move handlebar to the right.
Insert key into lock.
Turn key to the left, push
in
and turn key to the right.
Remove key.
Unlocking
is
accomplished
in
reverse order.
Lock
is
optional
on
Maxi and may be service installed at your
PUGH
dealer.
Fuel
tank
filler
cap
To open turn filler cap counter clockwise.
9
To Next Page
Loading...
